The demonstration led by ELES in the OSMOSE project demonstrated the possibility of cross-border flexibility activation near-to-real time while comlying with grid limitations.

The near real-time potential of flexibility of hydro producers was explored: new tools were developed and live demonstrated to estimate their remaining flexibility 15 min before delivery time.

The processes implemented resulted in a real cross-border activation thanks to a selection of bids every 5 minutes and an activation signal sent every 10 seconds.

Join the webinar: 2022-04-21 at h 13:00 CEST (UTC+2)

Speakers

Gorazd Ažman, ELES	Andrea Bello, HDE	Miran Kavrečić, HSE
Dusan Vlaisavljevic, EKC	Marilena Lazzaro, ENG	Charles Payement, RTE

Intended audience

Junior engineers; students; researchers; utilities; regulators; policymakers;

Further information

https://www.osmose-h2020.eu/ 

The Italian demo of OSMOSE project tested different kinds of flexibility solutions in a 9 month long experimentation on a real HV grid portion: one of this is the flexibility from the grid itself! By exploiting accurate load and generation forecasts and cost effective Dynamic Thermal Rating solutions, a new Energy Management System was developed in order to detect and solve efficiently congestions in a 3 hours ahead horizon.

Join the webinar: 2022-04-07 at h 13:00 CEST (UTC+1)

Speakers

• Leonardo Petrocchi (Terna)
• Giuseppe Lisciandrello (Terna)
• Dario Ronzo (RSE)
• Davide Poli (ENSIEL)
• Alfredo Vaccaro (ENSIEL)

Key messages

Capital-light investments and prediction algorhitm can enhance existing assets exploitation, becoming an efficient add-on to standard infrastructural planning of the grid.

Intended audience

TSOs, academy, industry

Further information

https://www.osmose-h2020.eu/ 

The speakers will lead you towards two demonstration activities part of the OSMOSE project concerning off-the-shelf inverters interfacing energy storage systems with the power grid that can be turned into grid-forming units through suitable control upgrades in order to provide several services to the power system when it hosts massive amount of inverter-based renewable/stochastic generation. This is achieved thanks to the provision of synchronisation services superposed to classic regulation ones.

Join the webinar: 2022-04-05 at h 13:00 CEST (UTC+1)

Speakers

Carmen Cardozo (RTE R&D)	Mario Paolone (EPFL)	Markel Zubiaga (Ingeteam R&D)

Key messages

Within the context of service provision to future power systems hosting massive amount of inverter-based renewable/stochastic generation, 2 demonstrators have shown that grid forming capability can be provided from off-the-shelf equipment. One demonstration is based on a existing MW-class BESS connected to the medium voltage grid of the EPFL campus, while the other was built for the OSMOSE project by Ingeteam and connecter to the RTE network.

• Both demos proved that grid forming capability can be provided without hardware oversizing, drawing out the most of existing equipment and therefore limiting the cost.
• A hybrid system showed that supercapacitors installed on the DC side can handled all fast transients induced by grid forming control, therefore smoothing the battery output power.
• The controls have been improved to behave properly in different grid conditions including harmonics and unbalanced conditions.
• Multiservices provision can be done including grid forming capability taking into account the unit’s operational constraints.
• Accurate distribution-class PMUs can be used to assess the performance of grid forming vs grid following units.

Intended audience

This webinar is mainly suitable for transmission system operators (TSO), energy providers, converter manufacturers and researchers in the field of power electronics and/or power systems stability and control. The content of the webinar is also comprehensible for students and engineers with some background in the power systems dynamics.

Further information

https://www.osmose-h2020.eu/ 

IEC standards are essential to ensure a successful industrial uptake of innovative smart grid solutions, however further research and innovation are requested in order to develop standardized descriptions of innovative components.

This webinar introduces the activities performed in the OSMOSE project regarding the engineering process and the functional tests performed on a dedicated demonstrator, based on the international standard IEC 61850.  It addresses in particular the following questions aspects:

• Engineering process: configuration of the system, having devices from different manufacturers
• Results of functional tests: validation of the system configuration.

Join the webinar: 2022-01-28 at h 13:00 CET (UTC+1)

Speakers

Thomas Sterckx	Camille Bloch	Christoph Brunner	João Saragoça	Jörg Reuter

Key messages

IEC standards are essential to ensure a successful industrial uptake of innovative smart grid solutions, however further research and innovation actions are requested in order to to develop standardized descriptions of innovative components.

The proposed webinar describe the activities performed by OSMOSE partners during the engineering process and functional tests performed in WP7.1 and the contributions that these activities had provided to the development of IEC 61850 standards.

Intended audience

Very large audience from TSO, to DSO, DER project developers, components manufacturers and selected and invited external stakeholders (e.g.: ENTSO-E; T&D Europe, etc.)

Readings

1. Related web page on project website: www.osmose-h2020.eu/project-overview/wp7/
2. Deliverable link: https://www.osmose-h2020.eu/download/d7-1-iec61850-entso-e-profile-introduction-and-engineering-process-refinement/